Automatic Cutting and Laying Machine for EVA/TPT
Product Description
High compatibility, currently compatible with materials up to a
larger diameter of 800mm available on the market. Cutting and
feeding assistance mechanism, making material feeding convenient
and simple. The equipment is equipped with an electrostatic
eliminator, effectively removing static electricity.
EVA materials have a thermo-fusing function, improving efficiency
and ease of operation. For TPT materials, there is a material head
detection function, effectively preventing material waste due to
material factors. Equipped with a punching mold, the mold is
adjustable, and has strong applicability. The whole machine is
protected by a cover, with a light grid protection on the feeding
side, which is aesthetically pleasing and safe.
Product Parameters
| Product parameter | Data |
| Cycle Time | 20 seconds |
| Maximum Material Size Compatibility | Diameter 800mm |
| Applicable Component Size Range | Length1650-2500mm Width990-1400mm |
| Cutting Accuracy | EVA material±2mm; TPT material ±1.5mm |
| Laying Accuracy | ±1.5mm |
| Voltage | AC 380V 3-phase 5-wire 380V 50HZ/60HZ |
| Rated Power | 8KW |
| Air Pressure | 0.6-0.8Mpa |
| Air Consumption | 100L/min |
| Maximum Weight per Unit | 1400kg |
| Equipment Dimensions (Length x Width x Height) | 5940x2250x1700mm |
| Noise Level | <72db |
Detailed Photos
transport layout bearing1. Wide range of applications:
• It can laminate a variety of materials, such as paper (including
printed materials, photos, business cards, menus, etc.), flexible
films, and soft rubber boards. It can meet the needs of different
industries. For example, it can be used for advertising pictures in
the advertising industry, post-production of photos in the wedding
photography industry, carton packaging in the packaging industry,
and board laminating in the furniture industry.
2. Good laminating effect:
• Strong protective performance: The laminated film can protect the
surface of materials, making them have properties such as
waterproofing, moisture-proofing, dust-proofing, anti-wrinkling,
and anti-ultraviolet radiation, thus prolonging the service life of
materials.
• Beautiful appearance: It can make the surface of materials shiny
and brightly colored, creating a strong three-dimensional effect
and artistic appeal, and enhancing the visual effect and grade of
products.
Company Profile
Beijing X-Solar Energy Co., Ltd. was found in 2020, and
headquartered in Beijing. It's a science and technology innovative
energy enterprises with the main business of future cell R&D,
flexible photovoltaic modules, building photovoltaic module
production, high-end equipment manufacturing, production line
delivery, and AI-CITY wisdom energy management services.
In July 2023, the company's first demonstration factory, Jiangsu
X-Solar Green-building Technology Co., Ltd., was established in
Jiangyin CNBM Jetion Industrial Park. Meanwhile, Jiangsu YuanTeng
FengSheng Intelligent Manufacturing Technology Co., Ltd., a
wholly-owned equipment company of the company, delivered the
world's first "three-in-one" automatic production line for Jiangyin
base. The production line can be compatible with the production of
three categories: X-Solar Light shadow series (flexible PV
modules), X-Solar Light rhyme series (building PVtile modules),
X-Solar Light Curtain series (building PV wall modules), and
customized products. X-Solar PV series products have the advantages
of integrating architectural aesthetics, complying with design
specifications and creating energy value, which have been widely
recognized and praised by customers in domestic and overseas.
In 2024, the company has added two regional centers in Shanghai and
Guangzhou of China, and set up the Hong Kong X-Solar Future Energy
Research Institute, and overseas sales companies in Australia,
Italy, Germany, Saudi Arabia and Argentina. The company has
launched a global layout to provide sustainable energy products and
services to many countries, and has contributed to the "carbon
neutrality and carbon peak".
Exhibition Display
FAQ
1. General Knowledge about Laminating Machines
Question 1: What is a laminating machine used for?
Answer: A laminating machine is mainly used to apply a thin plastic
film onto the surface of various materials like paper (such as
printed documents, photos, brochures), cardboard, and some flexible
sheets. It aims to protect the materials, enhance their appearance,
make them waterproof, and increase their durability.
Question 2: How many types of laminating machines are there?
Answer: Generally, there are mainly two types: hot laminating
machines and cold laminating machines. Hot laminating machines use
heat to soften the film and then bond it to the substrate through
pressure. Cold laminating machines, on the other hand, rely on
adhesive films and apply pressure at room temperature to complete
the lamination process.
2. Operation and Usage
Question 3: How do I start up a laminating machine?
Answer: First, make sure the machine is properly connected to a
power source. Check if all parts are in good condition and properly
installed. Load the film roll correctly into the machine. Then turn
on the power switch and wait for the machine to initialize or reach
the set temperature (for hot laminating machines).
Question 4: What's the correct way to load the film into a
laminating machine?
Answer: Open the film loading compartment of the machine. Insert
the core of the film roll onto the designated spindle. Pull out the
leading edge of the film and thread it through the guiding rollers
and tensioning mechanisms according to the machine's instructions
until it reaches the lamination area.
Question 5: How can I adjust the lamination speed?
Answer: There is usually a speed adjustment knob or control panel
on the machine. You can turn the knob or enter the corresponding
commands on the panel to increase or decrease the speed as needed.
For thinner materials or simpler lamination tasks, you can set a
higher speed; for thicker or more delicate materials, a slower
speed is recommended.
3. Lamination Quality and Troubleshooting
Question 6: There are bubbles in the laminated product. What should
I do?
Answer: Bubbles may appear due to insufficient pressure, uneven
film spreading, or dust on the material surface. First, check and
adjust the pressure rollers to ensure even pressure. Make sure the
film is spread smoothly before lamination. Also, clean the surface
of the material to be laminated thoroughly to remove any
impurities.
Question 7: The laminated film peels off easily. What's the
problem?
Answer: It could be caused by poor adhesion of the film, which
might be due to improper temperature setting (for hot laminating
machines), low-quality film, or insufficient pressure during the
lamination process. Check and adjust the temperature if necessary,
try using a better-quality film, and increase the pressure slightly
to see if the problem can be solved.
Question 8: The edges of the laminated material are not straight.
How to fix it?
Answer: This might be because the material or film was not fed
evenly. Check if the feeding mechanism is working properly and if
the material and film are properly aligned. Adjust the alignment
guides and make sure the material is inserted straight into the
machine.
4. Maintenance and Care
Question 9: How often should I clean my laminating machine?
Answer: It's advisable to clean the machine regularly, at least
once a week if it's used frequently. Wipe the exterior with a soft,
dry cloth to remove dust. Clean the rollers and internal parts with
a mild cleaner and a soft brush to remove any adhesive residue or
debris that may accumulate during operation.
